Home > News > Content
Best Quality Paper Cup Bottom Roll Composition And Structure
Jun 19, 2017

Best Quality Paper Cup Bottom Roll Composition and structure

The bottom roller is an analysis and study of the phase composition and structural changes of al2o3-sio2 in the process of using al2o3-sio2 in the CSP system. Results show that the obvious characteristics of the castable is of compact structure, reasonable, especially the use of compound binder, giving both products at room temperature bonding strength, but also in the temperature gradient, the binder is not synchronized with the adjacent phase is continuous sintering reaction, make the products always maintain stable volume, compact structure and has a certain strength.

Instrument to edit

Bottom roller pressure type sugarcane crushing machine, its structural features from the original top roller pressure under the bottom roller pressure, through set up under the front roller and the roller bearing hydraulic piston cylinder to achieve. Compared with the existing technology, the machine has stable transmission, less wear and tear, long life, good reliability, simple structure, light weight, easy to adjust the best work parameters and low energy consumption and higher efficiency. Suitable for use in sugarcane press. Bottom roller pressure type sugarcane crushing machine, includes top roller (1), roller (2) before and after the comb roller (3), (4), discharge chute (5), into the material tank (6), frame (7) and base (8), its characteristics in the roller (2) before and after the roll bearing by (3) set the hydraulic piston cylinder (9) and (10).

The paper super press machine with resin bottom roller, it is in the existing bottom roller core (1) the outer wall bag has the resin coating layer (2). It has the advantages of high hardness, long period, easy to eliminate paper surface, and paper disease, which do not need to be run at the same time, cost low.

It is the highest speed roller in the machine equipment for the roll roll, and the bottom roller of the rewinding machine. At present, the maximum dynamic balance speed of 2800m/min is very high, and the roller can carry a weight of 60 tons. For this type of roller made in addition to ensure that the roller body wall thickness difference, more important is to take when dynamic balancing three sections of balance, to ensure that the dynamic deflection is not overweight, achieve smooth running at full speed. The surface layer is covered by the demand of the paper, including the rubber, polyurethane, tungsten carbide and electroplating.